SPECIFICHE
Inputs |
4 Line, 1 Tape IN, Input DIRECT at IN-4 (OPTIONAL) Phono at IN-1 (OPTIONAL) |
|
Inputs Impedance |
4 Line, 1 Tape IN = 10 Kohm Note : if not selected, the input IN-2 / IN-3/ IN-4/TAPE, are not terminated at any resistance load. Please give attention in use with source with output capacitor not internal terminated with resistor load. During the input switch an DC output voltage can be applied to speakers output and damage the speakers. |
|
Phono |
Gain 40 dB / 1 kHz, Input Impedance 47 Kohm (Input Impedance and Gain variable by Resistor on PC Board) |
|
Outputs |
1 Tape OUT, 2 pair of Main Speakers Outputs, 1 Head Jack 6.3 mm |
|
Frequency Response |
0-800 KHz (Volume at MAX) |
|
Power |
IPA-70R: IPA-100R: |
2 x 70 W RMS / 8 Ohm 2 x 100 W RMS / 8 Ohm |
Sensitivity (Volume at MAX) |
IPA-70R: IPA-100R: |
470 mV for 70 W / 8 Ohm 560 mV for 100 W / 8 Ohm |
Gain (Volume at MAX) |
IPA-70R, IPA-100R: 34 dB (28mV – 1W / 8 Ohm) |
|
Supply |
230 V AC / 50 Hz, (100V AC or 115 VAC / 50-60Hz in some country) |
|
Dimensions (HxWxD) |
100 x 445 x 360 mm |
|
Note |
Integrated amplifier with full remote control by NORMA RC-4 |
|
